Page 19 - quarter turn

1-048 Quarter-Turn L13.5

length 13.5, with fixing clip

This Quarter-Turn consists of three b)
basic parts which can be combined to • Insert: zinc die, chrome plated or
suit your application. black or combination of PA, black/
• On request parts can be assembled zinc die
by DIRAK. • Screw and wave washer: steel, zinc
• A pre-assembled Quarter-Turn can be plated
installed in the cutout. • Key: zinc die
• Max. IP54. c)
Material: • Cam: steel, zinc plated
a)
• Housing: PA, black or zinc die,
chrome plated
• Fixing clip: steel, zinc plated
• Grounding clip: stainless steel

a) Housinga) PA zinc die, see page
black chrome plated
RH with fixing clip 220-9501 220-9013
RH with fixing clip and grounding clip 220-9503 220-9007
Attention: On LH doors the opening direction is clockwise, this is different to the description 02.09
b) Insertb) PA, black zinc die, zinc die, key
and zinc die chrome plated black (zinc die)
with screw and wave washer
Triangular 6.5mm - 220-9101 220-9104 204-0112
Square 6mm - 220-9102 220-9105 204-0111
Slotted 1.5mm - 220-9103 220-9106 -
Socket hex. 4mm (5/32") - 220-9118 220-9119 -
Socket hex. 6mm - 220-9107 - -
Wing Knob, PA black/zinc die* 220-9117 - - -
c) Cam H in mmc) steel, zinc plated
7.5 220-0503 220-0503 220-0503
13.5 220-0501 220-0501 220-0501
19.5 220-0502 220-0502 220-0502
Special cams 02.20
Optional:
d) Assembling without O-ring 220-0001 220-0001 220-0001
* Assembling to b) cam 90° to wing 220-0006 - -
knob without O-ring

DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal 06.02.2011
Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com © copyright by DIRAK / Germany
02.19