Page 21 - quarter turn

1-070 Compression Latch Pr20.1

for cutout 20.1

HD compression latch with 4.5mm • A further advantage:
clamping grip for application outside • The double function is especially
sealed area. beneficial for pressurized enclosures.
• RH or LH application, vibration-proof. • After the first 90° opening turn, the
• The closing operation is subdivided pressure can escape because the
into 2 functions. door is still latched.
• The first 90° turn of the actuator • For increasing the A-dimension add
brings in the cam in closed position 5mm spacer(b).
and automatically aligns a sagging
door (Seal not yet compressed.) Material:
• A further 90° turn pulls the door tight a) and a1)
by 4.5mm. • Housing, insert, cam, frame-part:
• Matching dots mark the final position zinc die, black
(see lower drawing). • Fixing clip: spring steel, zinc plated
b)
• Spacer: zinc die, black

a) Compression latch complete with frame-part and insert Part No.
Double bit 3mm pin 291-9005
Double bit 5mm pin 291-9001
Square 8mm 291-9002
Slotted 2x4 deep 291-9003
Triangular 8mm 291-9004
b) Spacer for increasing the A-dimension
about 5mm 200-4804.34

DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal 06.02.2011
Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com © copyright by DIRAK / Germany
02.21