Page 45 - quarter turn

1-095 Quarter-Turn Pr20.1 L18

for cutout 20.1, length 18, Polyamide PA IP
4Nm 65/67
Polyamide Quarter-Turn double Material:
insulated. • Housing, insert and cam: PA, black
• RH or LH application.
• Pre-assembling by DIRAK is
advisable.
• A pre-assembled Quarter-Turn can be
installed in the cutout.

a) Housing Part No. see page
PA with nut PA (black) 200-9077
PA with nut steel (zinc plated) 200-9003
PA with nut (stainless steel) 200-9044
b) Insert with wave washer and screw
Square 7mm 200-9155
Square 8mm 200-9156
Triangular 8mm 200-9158
Double bit 3mm pin 200-9159
Double bit 5mm pin 200-9160
Slotted 2x4mm deep 200-9161
Wing knob 200-9173
Slotted recessed coinproof 200-9186
Crescent Czech 200-9184
c) Cam (further cams on request) H in mm / inch
18 / 0.709 200-5318
20 / 0.787 200-5320
22 / 0.866 200-5322
25 / 0.984 200-5325
28 / 1.102 200-5328
c1) Cams, steel zinc plated 02.78
Optional:
Water- and dust-tight according to IP65 by:
O-ring 12x2mm 200-1001
e) Flat external seal 200-0901
Water- and dust-tight according to IP67 by additional:
d) O-ring 10x2mm 200-1002
f) Assembling of cam, without O-ring 200-0001
Assembling of cam, with O-ring 200-0002
g) Assembling cam 90° to handle without O-ring 200-0019
Assembling cam 90° to handle with O-ring 200-0033

DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal 06.02.2011
Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com © copyright by DIRAK / Germany
02.45