Page 56 - quarter turn

1-130 Quarter-Turn with Wing Pr20.1 L18

for cutout 20.1, length 18, with cylinder 15 PA
Nm 4Nm
Wing handle Quarter-Turn, RH or LH Material:
application. • refer to descriptions listed
• The Quarter-Turn consists of two
basic components which can be
combined to suit your application.
• On request parts can be assembled
by DIRAK.
• A pre-assembled Quarter-Turn can be
installed in the cutout.

non locking keyed alike keyed alike keyed-
(with blank) DIRAK 1333 DS200 different/mixed see page
a) Quarter-turn with wing
handle consisting of: 200-9301* 200-9302** 500-9302** 200-9303**
- Handle part PA (black) with zinc die core
- Zylinder zinc die (chrome plated)
- or blank PA (black)
- Housing zinc die (black)
- Plain/ grounding nut: zinc die
a1) Quarter-turn as a), but handle, housing, barrel or plug made of PA (black)
nut steel (zinc plated) 200-9368* 200-9369** - 200-9370**
nut PA (black) 200-9371* 200-9372** - 200-9373**
b) Cam steel (zinc plated) 02.78, 02.82
b1)Cam PA (black) 02.45

Optional:
c) Assembling of cam, without 200-0001 200-0001 200-0001 200-0001
O-ring
Assembling cam 90° to 200-0019 200-0019 200-0019 200-0019
handle without O-ring

* Water- and dust-tight according IP65 DIN EN 60529
** with stainless dust-shutter

DIRAK GmbH Königsfelder Str. 1 58256 Ennepetal 06.02.2011
Tel.: 02333.837-0 Fax: 02333.837-100 www.dirak.com © copyright by DIRAK / Germany
02.56